A large amount of foam in the degreaser will affect the cleaning effect, how to solve it? You can use degreaser defoamer, add an appropriate amount of degreaser defoamer to defoam and inhibit the foam, which can prevent the foam from affecting the cleaning effect. For a good degreaser and defoamer, only a small amount of addition can play a good defoaming and anti-foaming effect.
(Picture: Why use degreaser and defoamer)
Cause analysis of foaming of degreaser
The degreasing agent is mainly configured by surfactants and builders. The degreasing and cleaning effect is achieved through the principles of emulsification, penetration, and dispersion.
Degreasing agent can effectively remove various oil stains and mechanical impurities attached to the metal surface, slowing down the characteristics of metal corrosion and friction and wear, and has a certain anti-rust performance. The water-based degreasing agent is suitable for removing steel, copper and its alloys, etc. The metal surface is oily, has the characteristics of low cleaning temperature and short time, no pollution after repeated use, which can greatly save energy, improve the operating environment, and reduce the labor intensity of workers. The formula uses commonly used chemical products, and the price is moderate.
Surfactants can increase degreasing and cleaning effects. However, because surfactants can change the surface tension, it is easy to cause a lot of foam.
(Picture: Analysis of the cause of foaming of degreaser)
Degreasing agent defoaming program
If a large amount of foam appears during the use of the degreaser, it will not only affect the cleaning effect, but also affect the subsequent processes and reduce production efficiency. Therefore, many degreasers require lower foaming power or no foaming.
If you encounter too much foam in the degreaser, you can control it by adding a defoamer. Defoamers are widely used in industrial cleaning agents, degreasing agents, degreasing powders, etc. The amount is small, but the effect is obvious.
(Picture: Nanhui metal degreaser defoamer provides samples)
The Nanhui defoamer manufacturer has developed and designed the degreasing agent defoaming agent for the characteristics of easy foaming of the degreasing agent. The defoaming agent is very fast. The defoaming agent can be added to the foaming system and can be quickly on the surface of the foam solution film. Spreading causes the surface layer of liquid to thin the liquid film until it ruptures. It is a metal cleaning and defoaming agent with good comprehensive defoaming performance.
Nanhui degreasing agent defoamer has the following advantages:
1. High defoaming ingredients, small dosage and high cost performance;
2. The manufacturer provides free samples, which can be obtained by contacting the technical specialist;
3. Good stability, acid and alkali resistance, high temperature environment, good defoaming and anti-foaming effect;
4. It is chemically inert, does not affect the performance of the degreasing agent, does not affect the transparency, and does not affect the degreasing cleaning effect.
Nanhui degreaser defoamer has good performance and good stability, and provides free sample service, which can be obtained by telephone consultation.
(Picture: Comparison effect of Nanhui degreasing agent defoaming)
Nanhui is a manufacturer with years of application experience. It has far more defoaming technology than other antifoaming agents in the market. From the above cases, we prove the strength of our Nanhui defoamer. We have a group of excellent defoaming engineers, and an independent laboratory that facilitates defoaming experiments with foams that are difficult for customers to solve. If you want to know more about defoamer products, you can call our hotline: +86 13428601010.
This article is from the manufacturer of Nanhui defoamer (http://www.nhdefoamer.com/), please indicate the source if you need to reprint.
