In industry, during machine tool processing, equipment or electronic manufacturing metal processing, the cutting friction speed is too fast to generate heat source, and there will be a lot of debris at the same time, and the use of cutting fluid can help the equipment to cool down, lubricate, and remove dirt and debris. , but a large amount of foam will be generated during use, which will affect the performance of the cutting fluid and corrode the equipment. Therefore, it is very necessary to remove the foam with the cutting fluid defoamer.
The raw materials of cutting fluid defoamer are not redundant at all
Mainly based on base oil, most of which are oily in form, and polyglycol ether, silicone resin, white carbon black, etc. Among them, silicone oil has the effect of quickly breaking the foam, while polyether components have a good foam suppression effect, and others High-efficiency dispersants can emulsify and spread well, and they will not be affected by the high temperature of cutting when they are synthesized through special processes. The degree of moisturizing and lubricating is not affected, and it can remove the foam to improve the cleaning power of the cutting fluid, protect the equipment from being damaged, and without the hindrance of foam, the cutting effect is better. Therefore, cutting fluid defoamer can be said to be the best partner for cutting fluid!
The precipitation of cutting fluid defoamer is generally divided into two situations. The first is that the quality of the product developed by the selected manufacturer is not good. It leads to the problem of the loss of raw materials on the ground. Therefore, we must prevent this problem from happening. When purchasing cutting fluid defoamers, we must choose manufacturers with good technology, experience, and sample testing, and add appropriate amounts in batches. This ensures that The cutting fluid defoamer will not affect the precipitation problem by adding more or less, and can improve its defoaming performance well.
