• Working Hours:Mon-Fri:08:00-18:30
  • Phone/Skype/Whatsapp: 86 13428601010
    E-mail: yoyo@nanhuichina.com   visketcup985@gmail.com
  • Coating defoamer

    Nanhui real stone paint defoamer case

    From : NanHui 2021/3/1 Share:
    Back to list

    Customer question

    1. Customer information: India Baochen Henyuan Technology Co., Ltd. specializes in the production of coatings. When encountering the problem of foaming of real stone paint, I found Nanhui sales Miss Ouyang through the Internet, looking for a real stone paint with good defoaming effect. Agent.

    Real stone paint sample 

    (Picture: Real stone paint sample)

    2. Sample information: real stone paint

     Sample name

     Appearance

     PH

     Viscosity

     Water solubility

    Real stone paint paint

    transparent

     8

     100MPA/S

     soluble in water


    Customer request

    1. It is required that the defoaming effect is good after adding the defoaming agent.

    2. Does not affect the quality of real stone paint.

     Nanhui real stone paint defoamer sample

    (Picture: Nanhui real stone paint defoamer sample)

    Solution

    1. Reasons for the blistering of real stone paint

    (1) External factors: During the construction of real stone paint, such as air spraying, airless spraying, curtain coating, etc., turbulence, splashing, impact, air pockets, etc. in the paint will be added to the freedom of the paint system to varying degrees Yes, resulting in easy foaming.

    (2) Main factors: When adding emulsifier to water-based latex paint, the surface tension of the emulsion system is greatly reduced due to the use of the emulsion, and it is easy to foam.

     Real stone paint coating applied to the building

    (Picture: Real stone paint coating applied to the building)

    2. The hazards of blistering of real stone paint:

    (1) The air in the foam hinders the dispersion of pigments or fillers;

    (2) Insufficient utilization of equipment affects production quality;

    (3) Foaming is still at the stirring speed, which prolongs the mixing time;

    (4) The pigments and fillers cannot be fully wetted;

    (5) It also causes dissatisfaction and uneven weight in the continuous filling production line;

    (6) There are pits, small holes, etc. on the coating film during use.


    3. Analysis of the types of defoamers for real stone paint coatings

    (1) Tributyl phosphate is more expensive, has poor foam suppression and cannot be stirred, otherwise it will regenerate foam.

    (2) Although the price of n-octanol is low, its ability to break and raise bubbles is poor and contains bad gas, which is harmful to human health.


    4. Nanhui targeted real stone paint defoaming test

    Sample No.

    Model

    Test Results

    A

    CQ-613

    Fast defoaming speed, long foam suppression time, meeting customer requirements

    B

    CQ-209

    Fast defoaming speed and long foam suppression time, meeting customer requirements

    C

    CQ-106

    Fast defoaming, less dosage, meeting customer requirements

    Nanhui is a manufacturer with years of application experience. It has far more defoaming technology than other antifoaming agents in the market. From the above cases, we prove the strength of our Nanhui defoamer. We have a group of excellent defoaming engineers, and an independent laboratory that facilitates defoaming experiments with foams that are difficult for customers to solve. If you want to know more about defoamer products, you can call our hotline: +86 13428601010.

    This article is from the manufacturer of Nanhui defoamer (http://www.nhdefoamer.com/), please indicate the source if you need to reprint.

Online Message for More Consultation
  • Links:
  • COPYRIGHT © 2003-2020 Guangdong NanHui New Material Co., Ltd.