-
-
Defoamer powder for concrete and cement mortar CQ-343
-
Model No.： CQ-343 Appearance： White powder Active Content： 52~100% PH： 7-8 Application： Defoaming in concrete, cement mortar, putty powder, gypsum, ceramic products, etc. -
The main features of the defoaming powder for concrete and cement mortar are: alkali and acid resistance, fast defoaming speed, long defoaming time, high efficiency, and non-toxic, non-corrosive, and no adverse side effects. Low COD, low consumption, and environmentally friendly. It is a high-efficiency powder defoamer. In strong alkaline systems, many silicone powder defoamers have problems such as demulsification and oil floating, and lose the physical state that the defoamer should have. Not only does the defoaming ability decrease, but it also causes unexpected disadvantages to the product system. After many improvements and a lot of practice, it has been proved that the defoaming powder for concrete and cement mortar can not only maintain the ability to eliminate and suppress foam in strong acid and alkali environments, but also has strong self-leveling properties, especially good for eliminating small bubbles, and can bring good results by adding very small amounts, with a very high cost performance.
| (1) Fast defoaming and long-term foam suppression Defoaming speed up to 5000 bubbles per second Low dosage and low cost Adding amount as low as 0.01% |
 |
| (2) Widely used in the industry, acid and alkali resistant Excellent defoaming effect in various foam systems There are many varieties and models, which can be selected according to your needs. Can be customized according to the specification requirements |
 |
| (3) Fast and timely delivery One-to-one after-sales service |  |
NanHui defoamer is widely used in water treatment, industrial cleaning, metalworking fluid, textile and dyeing, papermaking, coating and ink, daily chemical, agriculture, food, desulfurization, oilfield drilling, mining and other aqueous and oil systems.
Recommended dosage: The general defoamer is added at 0.1% of the total foaming system. Please test the specific dosage.
Packaging : This product is packed in 60kg, 200kg, 1000kg plastic drums
Storage : This product is not dangerous. It is non-flammable and sealed and stored in a cool, ventilated, and dry place indoors. The container should be strictly sealed after each use. The shelf life is about 12 months at 25°C.
Transportation : The product should be sealed well during transit to prevent moisture, strong alkali, strong acid, rainwater, and other impurities.
